| |
Specifications
Type
|
PR110-10-10
|
Range of Travel |
+/-10° (Roll Axis)
+/-10°
(Pitch Axis )
|
Table Size |
65 mm x 65 mm
|
Gear Ratio |
1° (stage) :
352° (motor) (Roll Axis)
1° (stage) : 352° (motor) (Pitch Axis)
|
Drive Mechanism |
Worm Gear |
Travel Guide
|
Crossed-roller Guide |
Stepper Motor
|
|
Typical Phase Resistance
|
3.8 Ohms, Bi-directional
|
Typical Phase Current |
1 Amp |
DB-9 Male Connector
|
Pin Assignment and Description
|
1
|
+5 VDC
|
2
|
CCW Limit Switch
, Open Collector, Normally Open, Needs Pull up Resistor
|
3
|
CW Limit Switch, Open Collector
, Normally Open, Needs Pull up Resistor
|
4
|
Common
|
5
|
Not Connected
|
6
|
Stepper Motor Phase A+
|
7
|
Stepper Motor Phase A-
|
8
|
Stepper Motor Phase B+
|
9
|
Stepper Motor Phase B-
|
|
|
Base Material
|
Aluminum Alloy |
Surface Treatment
|
Black Anodized |
Load Capacity |
4.5
kg
|
Weight
|
1.5 kg
|
Maximum Speed |
10 °/sec |
Typical Repeatability |
+/-4‘ |
Typical Positional Accuracy |
+/-9‘ |
Typical Backlash |
+/-3‘ |
|
Stepper Motor Driven Mechanical Drawing (Roll Table)
|
|
Ordering Information
Part No.
|
Description
|
Amount
|
PR
110-10-10-01
|
Dual-axis Stepper Motor Driven Linear Pitch and Roll Stage, Table Size
65x65 mm
|
Click to Get a Quote
|
PR
110-10-10-02
|
Dual-axis
Three Phase Brushless Servo Motor with Quadrature Incremental Optical Encoder Driven Pitch and Roll Stage,
Table Size
65x65 mm
|
Click to Get a Quote
|
PR
110-10-10-03
|
Dual-axis DC Servo Motor with Quadrature Incremental Optical Encoder Driven Pitch and Roll Stage,
Table Size
65x65 mm
|
Click to Get a Quote
|
PR
110-10-10-04
|
Dual-axis Stepper Motor Driven Linear Pitch and Roll Stage
with 500 Cycles per Revolution Quadrature Optical Encoders
Mounted at the back of the Stepper Motors
, Table Size
65x65 mm
|
Click to Get a Quote
|
Related Products
|