|
| |
Host Controlled
Integrated Motion Controller and Motor Driver, RS-232, USB Interface
Any Combination of Stepper and
Servo Motors
ICAD
Series
|
|
|
|
|
Features
- Plug-and-Play
- Quick and Easy to Install
- Very Compact and Easy to Use
- Low Power Consumption, High Torque Motors, High
Speed Capability
- Serially Controllable, Programmable or Manual Control
- Host Controlled, PLC, C/C++, Python, Visual Basic, LabVIEW™,
MATLAB™
- Capable of Running Script Command
- Available to Drive Stepper, DC Servo, Brushless, and
Voice Coil Motors
- Optional Joystick / Trackball Interface
- Optional HOME and LIMIT Switches
- Optional TTL / CMOS Inputs and Outputs
- Optional Quadrature Encoder Feedback
- Totally Integrated Solution
- Evaluation Unit Is Available upon Request
|
|
Software
-
Easy System Setup and Evaluation
-
Menu Driven
-
Free Software Included
Stepper Motor Driver
- Up to 7 Amp Phase Current
- Up to 256 Micro-steps per Step Resolution
- Size 8 to 42 Motors
- Auto Current Reduction
DC and Three Phase Brushless Motor
Driver
- Up
to 40 Amps Phase Current
- +12 VDC to +80 VDC
Communication Interface
- RS-232 Interface
-
Optional Ethernet Interface
- Optional USB Interface
|
|
|
The ICAD series of motor control system is an easy-to-use,
plug-and-play and
cost effective solution for stepper
or DC motor control applications.
Each system
includes
the desk-top power suppliy, the motion controller card,
the
micro-stepper and/or servo motor drivers.
This motor control system supports up to 4 axes of motion.
The
external host such as a PC, micro-controller or PLC sends a
series of commands to the controller via the RS-232 serial port.
The controller processes and executes the incoming commands.
It is also possible to download a series of commands into the
program memory.
In this mode, the controller is capable to perform a
sequence of instructions without need for a host to send the
commands.
The system can also be operated using an
analog joystick or a trackball.
The speed of the
motor is
proportional to the tilt angle of the joystick
or the rotational
speed of the trackball.
More Info...
|
Ordering Information
|
Part No. |
Description |
Amount |
|
ICAD-1-STPR-01 |
Single-axis Integrated
Controller and Stepper Motor
Driver |
Click to Get a Quote |
|
ICAD-2-STPR-01 |
Two-axis Integrated Controller
and Stepper Motor Driver |
Click to Get a Quote |
|
ICAD-3-STPR-01 |
Three-axis Integrated Controller
and Stepper Motor Driver |
Click to Get a Quote |
|
ICAD-4-STPR-01 |
Four-axis Integrated Controller
and Stepper Motor Driver |
Click to Get a Quote |
This series is suitable for two-phase stepper
motors.
|
|
Part No. |
Description |
Amount |
|
ICAD-1-SRVO-01 |
Single-axis Integrated Controller
and Single Phase Servo Motor
Driver |
Click to Get a Quote |
|
ICAD-2-SRVO-01 |
Two-axis Integrated Controller
and
Single Phase
Servo Motor Driver |
Click to Get a Quote |
|
ICAD-3-SRVO-01 |
Three-axis Integrated Controller
and
Single Phase
Servo Motor Driver |
Click to Get a Quote |
|
ICAD-4-SRVO-01 |
Four-axis Integrated Controller
and
Single Phase
Servo Motor Driver |
Click to Get a Quote |
This series is suitable for DC Servo Motor(s) with
Quadrature Incremental Optical Encoder(s).
Servo Motor Drivers:
Up to 20.0 Amps Phase Current
+18 ~ +80 VDC
Power Supply
Minimum Motor Inductance: 1000 UH
|
|
|
|
|
For a different configuration,
please contact us for a
prompt quotation.
|
